Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
138LR Light Duty Belt Driven Live Roller Conveyors
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
LIGHT DUTY BELT DRIVEN LIVE ROLLER CONVEYORS
(138LR)
1-3/8" x 18 Ga. Steel Roller
Not available for 24 hour shipments.
138LR is ideally suited for horizontal conveying of items
where transfers, side loading or unloading, or temporary
accumulation is required in light duty applications or when
small items are conveyed requiring close standard roller spacing.
Shown with optional supports
SPECIFICATIONS
TREAD ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G with 5/16” hex.
PRESSURE ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G with 5/16” hex.
RETURN ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G with 5/16” hex, adjustable.
BELTING: 6” wide black PVC-120 COS.
CENTER DRIVE: Reversible drive w/ 24” integral belt take-up. Specify location.
DRIVE PULLEY: 4” dia. with 1-3/16” dia. shaft or 8” dia. with 1-7/16” dia. shaft; both crowned and fully lagged.
END PULLEY: 4” dia., crowned, with 1-3/16” dia. shaft.
SPEED: 60 FPM, constant.
BED: 6” x 1-1/2” x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7’-0” elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30’.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
ROLLER CHAIN: Drive pulley is driven by No. 50 chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional.
OPTIONAL EQUIPMENT
BELTING: 6” wide black PVC-150;
12” wide PVC-120.
END DRIVE: Mounted underneath conveyor. Minimum possible height is 20” TOR for underneath mounted end drive. Belt take-up required for end drive (if substituting end drive for center drive).
SIDE MOUNTED END DRIVE: Provides overall conveyor height of 9”.
AUXILIARY TAKE-UP: Provides 24” of belt take-up. Specify location. See Power Accessories.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
CEILING HANGERS: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyor Accessories.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
SPEED: Constant speed 3-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED.
GUARD RAILS: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to
6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed
channel (model FC); 1-1/2” angle
(model GA1-1/2). See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; For-ward/reversing /stop push button station. Mounting and pre-wiring for units up to 12’ long.
HP@ 60 FPM |
“A” MAX |
“B” MAX |
||
4” DRV. |
8” DRV. |
4” DRV. |
8” DRV. |
|
1/3 |
15-5/8” |
16-5/8” |
58-5/32” |
58-5/32” |
1/2 |
15-5/8” |
16-5/8” |
58-5/32” |
58-5/32” |
3/4 |
16” |
16-5/8” |
58-25/32” |
58-25/32” |
1 |
16-1/4” |
16-5/8” |
59-17/32” |
59-17/32” |
1-1/2 |
17-1/8” |
17-1/8” |
61-21/32” |
61-21/32” |
2 |
18” |
18” |
62-21/32” |
62-21/32” |
CONVEYOR LENGTH |
6’ |
10’ |
15’ |
20’ |
25’ |
30’ |
40’ |
50’ |
60’ |
70’ |
80’ |
90’ |
100’ |
||
BF |
OAW |
BELT |
UNIT WEIGHTS (lbs.) with 1-1/2” Roller Center (For other centers, deduct weights below) |
||||||||||||
10” |
13” |
2-1/4” |
385 |
484 |
609 |
739 |
864 |
990 |
1250 |
1504 |
1752 |
2022 |
2281 |
2541 |
2794 |
16” |
19” |
2-1/4” |
447 |
575 |
735 |
886 |
1046 |
1202 |
1517 |
1832 |
2150 |
2463 |
2778 |
3093 |
3409 |
22” |
25” |
2-1/4” |
504 |
656 |
846 |
1035 |
1225 |
1410 |
1790 |
2161 |
2537 |
2913 |
3290 |
3665 |
4047 |
Deduct the following weights (lbs.) for other than 1-1/2” centers
CONVEYOR LENGTH |
6’ |
10’ |
15’ |
20’ |
25’ |
30’ |
40’ |
50’ |
60’ |
70’ |
80’ |
90’ |
100’ |
|
BF |
Roller Centers |
|||||||||||||
10” |
3” |
-36 |
-60 |
-90 |
-120 |
-150 |
-180 |
-240 |
-300 |
-360 |
-420 |
-480 |
-540 |
-600 |
16” |
3” |
-54 |
-90 |
-135 |
-180 |
-225 |
-270 |
-360 |
-450 |
-540 |
-630 |
-720 |
-810 |
-900 |
22” |
3” |
-72 |
-120 |
-180 |
-240 |
-300 |
-360 |
-480 |
-600 |
-720 |
-840 |
-960 |
-1080 |
-1200 |
10” |
4-1/2” |
-48 |
-80 |
-120 |
-160 |
-200 |
-240 |
-320 |
-400 |
-480 |
-560 |
-640 |
-720 |
-800 |
16” |
4-1/2” |
-72 |
-120 |
-180 |
-240 |
-300 |
-360 |
-480 |
-600 |
-720 |
-840 |
-960 |
-1080 |
-1200 |
22” |
4-1/2” |
-96 |
-160 |
-240 |
-320 |
-400 |
-480 |
-640 |
-800 |
-960 |
-1120 |
-1280 |
-1440 |
-1600 |
Pop-out rollers should be retained in frame if unit is elevated to 7’-0” and above.
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911