Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
138VP Light Duty Variable Pressure Accumulation Conveyors
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
LIGHT DUTYVARIBALE PRESSURE ACCUMULATION CONVEYORS
(138VP)
1-3/8" x 18 Ga. Galvanized Steel Roller
Not available for 24 hour shipments.
138VP accumulates goods safely and with minimum back pressure. Reversible, it can transport loads up to 100 lbs./ft. with as little as
2-1/2% back pressure. Ideally, packages of uniform weight can
be accumulated temporarily using pneumatic package stops.
Conveyor Shown with Optional Supports
SPECIFICATIONS
TREAD ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G with 5/16” hex.
PRESSURE ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G with 5/16” hex.
RETURN ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G w/ 5/16” hex, adjustable.
BELTING: 2-1/4” wide “high strength” PVC-150 belt.
CENTER DRIVE: Reversible drive with 24” integral belt take-up.
DRIVE PULLEY: 4” dia. with 1-3/16” dia. shaft or 8” dia. with 1-7/16” dia. shaft, both crowned and fully lagged.
SPEED: 60 FPM, constant.
END PULLEY: 4” dia., crowned, with 1-3/16” dia. shaft.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BED: 6” x 1-1/2” x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7’-0” elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30’.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional.
OPTIONAL EQUIPMENT
BELTING: 6” wide PVC-120; 6” wide PVC-150.
END DRIVE: Mounted underneath conveyor. Minimum possible height is 20” TOR for underneath mounted end drive. Belt take-up required for end drive (if substituting end drive for center drive).
SIDE MOUNTED END DRIVE: Provides overall conveyor height of 9”.
AUXILIARY TAKE-UP: Provides 24” of belt take-up. Specify location. See Power Accessories.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
CEILING HANGERS: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyor Accessories.
SPEED: Constant speed 3-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED.
GUARD RAILS: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to
6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed
channel (model FC); 1-1/2” angle
(model GA1-1/2). See Conveyor Accessories.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; For-ward/reversing /stop push button station. Mounting and pre-wiring for units up to 12’ long.
HP@ 60 FPM |
“A” MAX |
“B” MAX |
||
4” DRV. |
8” DRV. |
4” DRV. |
8” DRV. |
|
1/3 |
15-5/8” |
16-5/8” |
58-5/32” |
58-5/32” |
1/2 |
15-5/8” |
16-5/8” |
58-5/32” |
58-5/32” |
3/4 |
16” |
16-5/8” |
58-25/32” |
58-25/32” |
1 |
16-1/4” |
16-5/8” |
59-17/32” |
59-17/32” |
1-1/2 |
17-1/8” |
17-1/8” |
61-21/32” |
61-21/32” |
2 |
18” |
18” |
62-21/32” |
62-21/32” |
ONVEYOR LENGTH |
6’ |
10’ |
15’ |
20’ |
25’ |
30’ |
40’ |
50’ |
60’ |
70’ |
80’ |
90’ |
100’ |
||
BF |
OAW |
BELT |
UNIT WEIGHTS (lbs.) with 1-1/2” Roller Centers (For other centers, deduct weights below) |
||||||||||||
10” |
13” |
2-1/4” |
385 |
484 |
609 |
739 |
864 |
990 |
1250 |
1504 |
1752 |
2002 |
2281 |
2541 |
2794 |
16” |
19” |
2-1/4” |
447 |
575 |
735 |
886 |
1046 |
1202 |
1517 |
1832 |
2150 |
2463 |
2778 |
3093 |
3409 |
22” |
25” |
2-1/4 |
504 |
656 |
846 |
1035 |
1225 |
1410 |
1790 |
2161 |
2537 |
2913 |
3290 |
3665 |
4047 |
Deduct the following weights (lbs.) for other than 1-1/2" centers.
CONVEYOR LENGTH |
6’ |
10’ |
15’ |
20’ |
25’ |
30’ |
40’ |
50’ |
60’ |
70’ |
80’ |
90’ |
100’ |
|
BF |
Roller Centers |
|||||||||||||
10” |
3” |
-36 |
-60 |
-90 |
-120 |
-150 |
-180 |
-240 |
-300 |
-360 |
-420 |
-480 |
-540 |
-600 |
16” |
3” |
-54 |
-90 |
-135 |
-180 |
-225 |
-270 |
-360 |
-450 |
-540 |
-630 |
-720 |
-810 |
-900 |
22” |
3” |
-72 |
-120 |
-180 |
-240 |
-300 |
-360 |
-480 |
-600 |
-720 |
-840 |
-960 |
-1080 |
-1200 |
10” |
4-1/2” |
-48 |
-80 |
-120 |
-160 |
-200 |
-240 |
-320 |
-400 |
-480 |
-560 |
-640 |
-720 |
-800 |
16” |
4-1/2” |
-72 |
-120 |
-180 |
-240 |
-300 |
-360 |
-480 |
-600 |
-720 |
-840 |
-960 |
-1080 |
-1200 |
22” |
4-1/2” |
-96 |
-160 |
-240 |
-320 |
-400 |
-480 |
-640 |
-800 |
-960 |
-1120 |
-1280 |
-1440 |
-1600 |
Pop-out rollers should be retained in frame if unit is elevated to 7’-0” and above.
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911