Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
192CDLRC Medium Duty Chain Driven Live Roller Curves
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
MEDIUM DUTY CHAIN DRIVEN LIVE ROLLER CURVES
(192CDLRC)
1.9” dia. x 12 ga. steel rollers
Not available 24 hour shipments.
Roach 192CDLRC is a medium duty chain driven live roller curve, designed to transport medium duty loads such as castings or drums. NOTE: When conveying medium duty pallet loads, use model 254TCDLRC, opposite page, to maintain product orientation.
Shown with optional supports
SPECIFICATIONS
TREAD ROLLERS: 1.9” dia. x 12 ga. steel, model 192S with sprockets.*
CHAIN DRIVE: Roller to roller with No. 40 circular roller chain.
END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.
BED: 5-1/2” x 1-1/2” x 10 ga. and 3-1/2” x 1-1/2” x 10 ga. formed steel channel frame.
BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 45 FPM, constant.
dRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
ROLLER CENTERS: 5” RC measured at outside radius of curve.
ELECTRICAL CONTROLS: Optional.
OPTIONAL EQUIPMENT
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters, ceiling hangers and polytier supports available. See Conveyor Accessories.
ELECTRICAL CONTROLS: Magnetic or manual starter; limit switch; others available.
HP @ 45FPM |
“C” |
1/3, 1/2 |
13-1/8” |
3/4 |
13-1/2” |
1 |
13-3/4” |
1-1/2 |
14-5/8” |
2 |
15-1/2” |
UNIT |
90¯ |
45¯ |
||||
BF |
CONV. SURFACE |
OUTSIDE RADIUS |
QTY. RLRS. |
WT (lbs.) |
QTY. RLRS. |
WT. (lbs.) |
15” |
12” |
4’-10-3/4” |
18 |
339 |
9 |
265 |
21” |
18” |
4’-10-3/4” |
18 |
374 |
9 |
277 |
27” |
24” |
4’-10-3/4” |
18 |
409 |
9 |
292 |
33” |
30” |
8’-15/16” |
30 |
543 |
15 |
313 |
39” |
36” |
8’-15/16” |
30 |
586 |
15 |
337 |
45” |
42” |
8’-15/16” |
30 |
633 |
15 |
364 |
51” |
48” |
8’-15/16” |
30 |
681 |
15 |
391 |
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911