Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
196VP Medium Duty Variable Pressure Accumulation Conveyors
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
MEDIUM DUTYVARIBALE PRESSURE ACCUMULATION CONVEYORS
(196VP)
1.9" x 16 Ga. Steel Roller
24 hour shipments include all 1-foot increments 6’-0” to 100’-0” on conveyors.
Model 196VP, variable pressure accumulator, conveys loads up to 125 lbs./ft. with as
little as 2-1/2% back pressure. With reversible center drive, this unit accumulates
goods safely with minimum back pressure. Ideally, packages of uniform weight can
be temporarily accumulated by combining Roach pneumatic package stops.
Conveyor Shown with Optional Supports
SPECIFICATIONS
TREAD ROLLERS: 1.9” dia. x 16 ga. steel, model 196S.
PRESSURE ROLLERS: 1.9” dia. x 16 ga. steel, model 196S.
RETURN ROLLERS: 1.9” dia. x 16 ga. steel, model 196S, adjustable.
BELTING: 2-1/4” wide “high strength” PVC-150 belt. *NOTE: WHEN SLAVE DRIVING OTHER UNITS, OPTIONAL 6” WIDE PVC-120 DRIVE BELT MUST BE USED ON UNITS 20’ LONG AND ABOVE.
CENTER DRIVE: Reversible drive with 24” integral belt take-up. For units under 8’-0” overall length, drive components must be stacked. Consult factory for minimum unit elevation.
END PULLEY: 4” dia., crowned, with 1-3/16” dia. shaft.
DRIVE PULLEY: *4” dia. with 1-3/16” dia. shaft or 8” dia. with 1-7/16” dia. shaft, both crowned and fully lagged.
SPEED: 60 FPM, constant.
BED: 7” x 1-1/2” x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7’-0” elevation or higher, rollers must be retained in conveyor frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
SQUARING RODS: Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30’.
BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive pulley is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional.
OPTIONAL EQUIPMENT
END DRIVE: Mounted underneath conveyor. Minimum possible height is 20” TOR for underneath mounted end drive. Belt take-up required for end drive (if substituting end drive for center drive).
SIDE MOUNTED END DRIVE: Provides overall conveyor height of 10”.
BELTING: 6” wide black PVC-120; 6” wide black PVC-150; 12” wide PVC-120.
GUARD RAILS: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to
6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed
channel (model FC); 1-1/2” angle
(model GA1-1/2). See Conveyor Accessories.
CEILING HANGERS: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyors Accessories.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
SPEED: Constant speed 3-120 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED.
GALVANIZED ROLLERS: Both tread and pressure rollers available in galvanized steel, model 196G. Specify tread only or both tread and pressure rollers.
192S TREAD ROLLERS: 1.9” dia. x 12 ga. steel tread rollers, model 192S, available in model 192VP.
AUXILIARY TAKE-UP: Provides 24” of belt take-up. Specify location. See
Power Accessories.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, brake motor, 115/230/1, 575/3, etc.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; For-ward/reversing /stop push button station. Mounting and pre-wiring for units up to 12’ long.
HP@ 60 FPM |
“A” MAX |
“B” MAX |
||
4” DRV. |
8” DRV. |
4” DRV. |
8” DRV. |
|
1/3 |
16-5/8” |
17-5/8” |
58-5/32” |
58-5/32” |
1/2 |
16-5/8” |
17-5/8” |
58-5/32” |
58-5/32” |
3/4 |
17” |
17-5/8” |
58-25/32” |
58-25/32” |
1 |
17-1/4” |
17-5/8” |
59-17/32” |
59-17/32” |
1-1/2 |
18-1/8” |
18-1/8” |
61-21/32” |
61-21/32” |
2 |
19” |
19” |
62-21/32” |
62-21/32” |
CONVEYOR LENGTH |
6’ |
10’ |
15’ |
20’ |
25’ |
30’ |
40’ |
50’ |
60’ |
70’ |
80’ |
90’ |
100’ |
||
BF |
OAW |
BELT |
UNIT WEIGHTS (lbs.) with 3” Roller Centers (For other centers, deduct weights below) |
||||||||||||
15” |
18” |
2-1/4” |
446 |
553 |
722 |
856 |
1025 |
1159 |
1462 |
1765 |
2068 |
2371 |
2674 |
2977 |
3280 |
19” |
22” |
2-1/4” |
478 |
600 |
782 |
934 |
1123 |
1270 |
1600 |
1934 |
2274 |
2595 |
2925 |
3255 |
3590 |
21” |
24” |
2-1/4” |
511 |
645 |
847 |
1015 |
1217 |
1385 |
1755 |
2125 |
2495 |
2865 |
3235 |
3605 |
3975 |
25” |
28” |
2-1/4’ |
557 |
709 |
939 |
1132 |
1358 |
1543 |
1963 |
2370 |
2780 |
3193 |
3608 |
4020 |
4458 |
27” |
30” |
2-1/4” |
579 |
738 |
977 |
1176 |
1415 |
1614 |
2052 |
2490 |
2928 |
3366 |
3804 |
4242 |
4680 |
33” |
36” |
2-1/4” |
650 |
828 |
1107 |
1337 |
1613 |
1843 |
2349 |
2855 |
3361 |
3867 |
4373 |
4879 |
5385 |
39” |
42” |
2-1/4’ |
717 |
928 |
1237 |
1501 |
1810 |
2074 |
2647 |
3220 |
3793 |
4366 |
4939 |
5512 |
6085 |
Deduct the following weights (lbs.) for other than 3" centers.
Tread Roller Centers |
15” BF |
19” BF |
21” BF |
25” BF |
27” BF |
33” BF |
39” BF |
|||||||
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
|
4-1/2” |
-23 |
-45 |
-28 |
-55 |
-30 |
-60 |
-35 |
-69 |
-37 |
-75 |
-45 |
-90 |
-53 |
-105 |
6” |
-45 |
-90 |
-54 |
-108 |
-60 |
-120 |
-69 |
-138 |
-75 |
-150 |
-90 |
-180 |
-105 |
-210 |
Pop-out rollers should be retained in frame if unit is elevated to 7’-0” and above.
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911