251CDLR Heavy Duty Chain Driven Live Roller Conveyors

TREAD ROLLERS: 2-1/2” dia. x 11 ga. steel rollers, model 251S with sprockets.

CHAIN DRIVE: Roller to roller with No. 60 roller chain.

ROLLER CENTERS: 3”, 4-1/2”, 6”, 9” or 12”. (SEE NOTE FOR 3” RC)

CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

BED: 6” x 1-1/2” x 7 ga. and 4” x 1-1/2” x 7 ga. formed steel channel frame. Bed sections attached with couplings and floor supports.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide roller capacity of 540 lbs. per roller (maximum).

CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.

BED LENGTHS (4-1/2” or 9” RC): Intermediate bed section lengths 3’-0”, 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”,
8’-3”, 9’-0” and 9’-9” increments. Minimum overall conveyor length with drive 5’-3”. Maximum overall conveyor length: 58’-6” with 4-1/2” RC; 78’-0” with 9” RC.

BED LENGTHS (6” or 12” RC): Intermediate bed section lengths are available in 1’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.

ELECTRICAL CONTROLS: Optional.

SPEED: 35 FPM, constant.

*NOTE 3” RC: 3” RC are available with #40 chain on 40-14 double single sprocket sleeves.