297CDLR Heavy Duty Chain Driven Live Roller Conveyors

TREAD ROLLERS: 2-9/16” dia. x 7 ga. steel rollers, model 297S with sprockets.

CHAIN DRIVE: Roller to roller with No. 60 roller chain.

CENTER DRIVE: Reversible drive either side mounted or underside mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.

ROLLER CENTERS: 3”, 4-1/2”, 6”, 9”and 12”.

BED: 4” at 5.4 lbs. and 6” at 8.2 lbs. structural steel channel frame. Bed sections attached with couplings and floor supports.

SPEED: 35 FPM, constant.

BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth sealed. Roller bearings provide capacity of 540 lbs. per roller.

CHAIN GUARD: The chain drive is completely enclosed along the entire length of the conveyor.

BED LENGTHS (4-1/2” or 9” RC): Intermediate bed section lengths 3’-0”, 3’-9”, 4’-6”, 5’-3”, 6’-0”, 6’-9”, 7’-6”,
8’-3”, 9’-0” and 9’-9” increments. Minimum overall conveyor length with drive 5’-3”. Maximum overall conveyor length: 58’-6” with 4-1/2” RC; 78’-0” with 9” RC.

BED LENGTHS (6” or 12” RC): Intermediate bed section lengths are available in 1’-0” increments. Minimum overall conveyor length with drive 5’-0”. Maximum overall conveyor length 80’-0”.

MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ELECTRICAL CONTROLS: Optional.

*NOTE 3” RC: 3” RC are available with #40 chain on 40-14 double single sprocket sleeves.