Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
351TCDLRC Heavy Duty Tapered Roller Chain Driven Live Roller Curves
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
HEAVY DUTY TAPERED ROLLER CHAIN DRIVEN LIVE ROLLER CURVES
(351TCDLRC)
3.5" Tapered steel rollers
Not available for 24 hour shipments.
251CDLRC, heavy duty chain driven live roller curve, transports heavy unit loads. Heavy castings, drums and other loads not requiring product orientation may be effectively conveyed on this conveyor.
Shown with optional supports
SPECIFICATIONS
TREAD ROLLERS: 2-1/2” dia. x 11 ga. steel, model 251S with sprockets.
CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.
END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
BEARINGS: Removable type, heavy duty, ball bearings, zinc plated, grease packed, labyrinth sealed.
ROLLER CENTERS: 6” RC measured at outside radius of curve.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 35 FPM, constant.
BED: 6” x 1-1/2” x 7 ga. and 4” x 1-1/2” x 7 ga. formed steel channel frame.
CHAIN GUARD: The chain drive is enclosed, top and bottom, along the entire length of the conveyor.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with reference point located at outside of curve).
OPTIONAL EQUIPMENT
BED: Rollers on 4-1/2” centers on outside radius.
SPEED: Constant speed 1.5-60 FPM; DC variable speed; AC inverter variable speed. Other constant or variable speeds available. NOTE: CAPACITY CHANGES WITH SPEED. 100 FPM MAX. WITH ROLLER-TO-ROLLER CHAIN DRIVE.
MOTORS: Available through 3 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
FLOOR SUPPORTS: Supports, knee braces, casters, and polytier supports available. See Conveyor Accessories.
*NOTE: Orientation of product may be affected because of straight rollers in curve. To maintain orientation, use tapered roller curve.
HP @ 35FPM |
“C” |
3/4 |
13” |
1 |
13-1/4” |
1-1/2 |
14-1/8” |
2 |
15 |
UNIT |
90¯ |
45¯ |
||||
BF |
CONV. SURFACE |
OUTSIDE RADIUS |
QTY. RLRS. |
WT (lbs.) |
QTY. RLRS. |
WT (lbs.) |
15” |
12” |
7’-1-1/2” |
22 |
624 |
11 |
347 |
21” |
18” |
7’-1-1/2” |
22 |
672 |
11 |
374 |
27” |
24” |
7’1-1/2” |
22 |
721 |
11 |
401 |
33” |
30” |
7’-1-1/2” |
22 |
769 |
11 |
428 |
39” |
36” |
7’-1-1/2” |
22 |
815 |
11 |
454 |
45” |
42’ |
10’-3-3/4” |
32 |
1244 |
16 |
672 |
51” |
48” |
10’-3-3/4” |
32 |
1383 |
16 |
744 |
57” |
54” |
10’-3-3/4” |
32 |
1531 |
16 |
827 |
63” |
60” |
10’-3-3/4” |
32 |
1680 |
16 |
909 |
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911