Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
738LS Light Duty Line Shaft Conveyors
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
LIGHT DUTY LINE SHAFT CONVEYORS
(738LS)
1-3/8" x 18 Ga. Galvanized Steel Rollers
Not Available for 24 hour shipments!
Model 738LS has gained widespread usage with its unique design. Curves, spurs and a number of accessories may be driven by a SINGLE drive.
Shown with Optional Supports
SPECIFICATIONS
TREAD ROLLERS: 1-3/8” dia. x 18 ga. galvanized steel, model 138G w/ 5/16” hex, grooved.
DRIVE BELT: 1/8” dia., polyurethane belts. Nominal 10 lbs. per roller drive.
DRIVE SHAFT: 1” dia. C1018 cold rolled steel shaft.
COUPLINGS: Couplings located both ends (type “A”), one end only (type “B” or “C”) or none (type “D”). See ‘line shaft coupling chart’ on page 74 & specify.
CENTER DRIVE: Reversible drive; located approx. 18” from end of bed section for 3” and 6” RC; 16-1/2” for 4” RC.
BED: 7” x 1-1/2” x 12 ga. formed steel channel frame. Bed sections attached w/ splice plates and floor supports.
SPEED: 60 FPM, constant.
BEARINGS: Precision, lubricated, ball bearing units with composite housings.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 chain. Chain take-up provided on motor base.
CAPACITY: See Technical Section for load capacity rating.
ELECTRICAL CONTROLS: Optional.
OPTIONAL EQUIPMENT
SIDE MOUNTED DRIVE: With 10” minimum elevation.
FLOOR SUPPORTS: Supports, knee braces, casters, polytier supports & ceiling hangers available. See Conveyor Accessories.
SPEED: Constant 15-120 FPM, or variable (specify). MINIMUM operating speed for line shaft conveyor is 30 FPM. NOTE: CAPACITY CHANGES WITH SPEED.
MOTORS: Available through 2 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3.
ELECTRICAL CONTROLS: Manual start/stop push button switch; magnetic starter; others available.
HP@ 60 FPM |
“A” MAX |
1/3, 1/2 |
21” |
3/4, 1 |
22” |
1-1/2, 2 |
23” |
BF |
10” |
16” |
22” |
OAW |
13” |
19” |
25” |
Unit Weights (lbs.) W/1-1/2” Roller Centers* |
|||
2’ |
224 |
232 |
239 |
10’ |
399 |
459 |
515 |
20’ |
604 |
750 |
859 |
30’ |
838 |
1035 |
1194 |
40’ |
1058 |
1322 |
1532 |
50’ |
1278 |
1610 |
1871 |
60’ |
1498 |
1897 |
2209 |
70’ |
1717 |
2185 |
2548 |
80’ |
1937 |
2473 |
2887 |
90’ |
2156 |
2760 |
3249 |
100’ |
2376 |
3048 |
3590 |
*For other centers, deduct the following (RC/lbs. per ft.):
10” BF--3” RC/4 lbs.; 4” RC/5 lbs.; 6” RC/6 lbs.
16” BF--3” RC/6 lbs.; 4” RC/7.5 lbs.; 6” RC/9 lbs.
22” BF--3” RC/8 lbs.; 4” RC/10 lbs.; 6” RC/12 lbs.
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911