Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
796LS Medium Duty Line Shaft Conveyors
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
MEDIUM DUTY LINE SHAFT CONVEYORS
(796LS)
1.9" x 16 Ga. Steel Rollers
24 hour shipments include all 1-foot increments 2’-0” to 100’-0” on conveyors.
Roach 796LS line shaft driven conveyors have gained widespread usage with their unique design. Curves,
spurs and a variety of modules may be driven by a single drive.
Shown with Optional Supports
SPECIFICATIONS
TREAD ROLLERS: 1.9” dia. x 16 ga. steel, model 196S grooved.
DRIVE BELT: 3/16” dia., polyurethane belts. Nominal 15 lbs. per roller drive.
DRIVE SHAFT: 1” dia. C1018 cold rolled steel shaft.
COUPLINGS: Couplings located both ends (type “A”), one end only (type “B” or “C”) or none (type “D”). See ‘line shaft coupling chart’ and specify.
CENTER DRIVE: Reversible drive; located approximately 18” from end of bed section for 3” and 6” RC; 16-1/2” for 4”RC.
BEARINGS: Precision, lubricated, ball bearing units with composite housings.
SPEED: 60 FPM, constant.
BED: 7” x 1-1/2” x 12 ga. formed steel channel frame. Bed sections attached with splice plates and floor supports.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven by No. 50 chain. Chain take-up provided on motor base.
CAPACITY: See Technical Section for load capacity rating.
ELECTRICAL CONTROLS: Optional.
OPTIONAL EQUIPMENT
SIDE MOUNTED DRIVE: Provides overall conveyor height of 10”.
FLOOR SUPPORTS: Supports, knee braces, casters and polytier supports available. See Conveyor Accessories.
CEILING HANGERS: 5/8” dia. threaded rod with hardware to attach rods to conveyor. Provides 6’ clearance between ceiling and TOR (furnished in place of floor supports). See Conveyor Accessories.
CONVEYOR SPEED: Constant speed
15-120 FPM; DC variable speed; AC inverter variable speed. MINIMUM
operating speed for line shaft conveyor
is 30 FPM.
GALVANIZED ROLLERS: Tread rollers available in galv. steel, model 196G.
GUARD RAILS: 1-3/4” x 1” formed channel (model GC), adjusts horizontally to 8” wider than roller and vertically to
6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed
channel (model FC); 1-1/2” angle
(model GA1-1/2). See Conveyor Accessories.
MOTORS: Available through 2 HP in TEFC, explosion proof, dirty duty, 115/230/1, 575/3, etc.
ELECTRICAL CONTROLS: Magnetic starter (one direction or reversible); One direction manual starter; Momentary start/stop push button station; For-ward/reversing /stop push button. Mounting and pre-wiring for units up to 12’ long.
HP@ 60 FPM |
“A” MAX |
1/3, 1/2 |
21” |
3/4, 1 |
22” |
1-1/2, 2 |
23” |
CONVEYOR LENGTH |
2’ |
5’ |
10’ |
15’ |
20’ |
25’ |
30’ |
40’ |
50’ |
60’ |
70’ |
80’ |
90’ |
100’ |
|
BF |
OAW |
UNIT WEIGHTS (lbs.) with 3” Roller Centers (For other centers, deduct weights below) |
|||||||||||||
15” |
18” |
225 |
306 |
443 |
552 |
717 |
826 |
991 |
1265 |
1539 |
1813 |
2087 |
2361 |
2635 |
2909 |
19” |
22” |
236 |
326 |
475 |
624 |
773 |
922 |
1071 |
1369 |
1667 |
1965 |
2263 |
2561 |
2859 |
3157 |
21” |
24” |
249 |
345 |
495 |
655 |
815 |
1013 |
1135 |
1455 |
1775 |
2095 |
2415 |
2735 |
3055 |
3375 |
25” |
28” |
255 |
363 |
523 |
693 |
853 |
1018 |
1183 |
1513 |
1843 |
2173 |
2503 |
2833 |
3163 |
3493 |
27” |
30” |
260 |
374 |
545 |
716 |
887 |
1058 |
1229 |
1571 |
1913 |
2255 |
2597 |
2939 |
3281 |
3623 |
33” |
36” |
269 |
401 |
588 |
775 |
962 |
1149 |
1336 |
1710 |
2084 |
2458 |
2832 |
3206 |
3580 |
3954 |
39” |
42” |
288 |
438 |
643 |
848 |
1053 |
1258 |
1463 |
1873 |
2283 |
2693 |
3103 |
3513 |
3923 |
4333 |
Deduct the following weights (lbs.) for other than 3” centers
Tread Roller Centers |
15” BF |
19” BF |
21” BF |
25” BF |
27” BF |
33” BF |
39” BF |
|||||||
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
Per 5’ |
Per 10’ |
|
4” |
-14 |
-28 |
-17 |
-34 |
-19 |
-37 |
-21 |
-42 |
-23 |
-45 |
-27 |
-53 |
-31 |
-62 |
6” |
-28 |
-56 |
-34 |
-68 |
-37 |
-74 |
-42 |
-84 |
-45 |
-90 |
-53 |
-106 |
-62 |
-124 |
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911