Just Conveyors
Capabilities and Services
Just Conveyors
Product Line
- Gravity
(non powered) - Belt (Belt over Roller or Slider Pan)
- Accumulation and Sortation
- Line Shaft
- Live Roller (Belt and Chain Driven)
- Miscellaneous Powered
- Plastic Belt (Mattop)
- Plastic Belt (Table Top)
- Flexible and Truck Loading
- Low Profile
- Powered Roller
- Bulk Handling and Portable
- Stainless Steel and Food
- Magnetic
- Vacuum
- Custom
- Curves and Turns
- Inclined and Cleated Belt
- Vertical,
Elevator - Indexing
- OEM
- Automation
Just Conveyors
Mfg. Links
- Package and Unit Handling
Conveyor
- Stainless Steel Conveyor
- Low Profile
Conveyor
- Bulk Handling Conveyor
Web Site Validations:
We Accept Major
Credit Cards, ACH, and Wire Transfers:
796LSDS Medium Duty Line Shaft Diverging Switch Conveyors
BEST PRICING! QUICKEST SHIPPING! BEST WARRANTY! UNMATCHED SERVICE!
MEDIUM DUTY LINE SHAFT DIVERGING SWITCH CONVEYORS
(796LSDS)
1.9" x 16 Ga. Steel Rollers
Not available for 24 hour shipments.
796LSDS is used in diverging applications where line shaft conveyor is suitable. The pivot section of rollers, pneumatically actuated, skews to divert packages onto spur quickly and efficiently.
Shown with Optional Supports
SPECIFICATIONS
TREAD ROLLERS: 1.9” dia. x 16 ga. steel, model 196S grooved.
DRIVE BELT: 3/16” dia., polyurethane belts. Nominal 15 lbs. per roller drive.
DRIVE SHAFT: 1” dia. C1018 cold rolled steel shaft. NOTE: Spools in spur and spools in pivot roller section are keyed to provide positive drive (designed not to slip on drive shaft).
COUPLINGS: Couplings located both ends or one end only. Specify where couplings required.
BED: 7” x 1-1/2” x 12 ga. formed steel channel frame. Short side of spur is always 12” overall length.
ROLLER CHAIN: Spur driven via crossover with No. 40 chain.
BEARINGS: Precision, lubricated, ball bearing units with composite housings.
PNEUMATICALLY ACTUATED: Diverging section of rollers is pneumatically actuated utilizing 60PSI maximum.
MOTOR DRIVE: Unit is designed to be driven by 796LS.
DIRECTION OF FLOW: Specify right hand or left hand. To determine hand of spur, refer to pg. 136 in technical section.
MINIMUM PACKAGE SIZE: Consult
Just Conveyors for minimum package size
(minimum size may vary based on
conveyor width).
OPTIONAL EQUIPMENT
FLOOR SUPPORTS: Supports, knee braces, casters, polytier supports & ceiling hangers available. See Conveyor Accessories.
GUARD RAILS: 1-3/4” x 1” formed channel (model GC), adjusts
horizontally to 8” wider than roller and vertically to 6” above roller; formed steel fixed (model FSG in 2”, 4” and 6” heights; fixed
channel (model FC); 1-1/2” angle
(model GA1-1/2).
BF |
“A” |
“B” |
“C” |
WT. (lbs.) |
15” |
6’-0” |
40-7/8” |
38-3/8” |
290 |
19” |
8’-0” |
47-3/4” |
45-7/8” |
310 |
21” |
8’-0” |
51-1/4” |
49-5/8” |
325 |
25” |
8’-0” |
58-1/8” |
57-1/8” |
380 |
27” |
8’-0” |
61-5/8” |
60-3/4” |
526 |
33” |
10’-0” |
72’ |
72” |
586 |
39” |
10’-0” |
82-3/8” |
83-1/4” |
678 |
Just Conveyors
1513 Shirley Way
Bedford, TX 76022
Phone: (817) 494-3911
Fax: (480) 772-4979
Just Conveyors | Copyright 2009 | Privacy Policy | (817) 494-3911